Module Stdlib.Bigarray

Large, multi-dimensional, numerical arrays.

This module implements multi-dimensional arrays of integers and floating-point numbers, thereafter referred to as 'Bigarrays', to distinguish them from the standard OCaml arrays described in Array.

The implementation allows efficient sharing of large numerical arrays between OCaml code and C or Fortran numerical libraries.

The main differences between 'Bigarrays' and standard OCaml arrays are as follows:

Users of this module are encouraged to do open Bigarray in their source, then refer to array types and operations via short dot notation, e.g. Array1.t or Array2.sub.

Bigarrays support all the OCaml ad-hoc polymorphic operations:

Element kinds

Bigarrays can contain elements of the following kinds:

Each element kind is represented at the type level by one of the *_elt types defined below (defined with a single constructor instead of abstract types for technical injectivity reasons).

type float32_elt =
  1. | Float32_elt
type float64_elt =
  1. | Float64_elt
type int8_signed_elt =
  1. | Int8_signed_elt
type int8_unsigned_elt =
  1. | Int8_unsigned_elt
type int16_signed_elt =
  1. | Int16_signed_elt
type int16_unsigned_elt =
  1. | Int16_unsigned_elt
type int32_elt =
  1. | Int32_elt
type int64_elt =
  1. | Int64_elt
type int_elt =
  1. | Int_elt
type nativeint_elt =
  1. | Nativeint_elt
type complex32_elt =
  1. | Complex32_elt
type complex64_elt =
  1. | Complex64_elt
type ('a, 'b) kind =
  1. | Float32 : (float, float32_elt) kind
  2. | Float64 : (float, float64_elt) kind
  3. | Int8_signed : (int, int8_signed_elt) kind
  4. | Int8_unsigned : (int, int8_unsigned_elt) kind
  5. | Int16_signed : (int, int16_signed_elt) kind
  6. | Int16_unsigned : (int, int16_unsigned_elt) kind
  7. | Int32 : (int32, int32_elt) kind
  8. | Int64 : (int64, int64_elt) kind
  9. | Int : (int, int_elt) kind
  10. | Nativeint : (nativeint, nativeint_elt) kind
  11. | Complex32 : (Complex.t, complex32_elt) kind
  12. | Complex64 : (Complex.t, complex64_elt) kind
  13. | Char : (char, int8_unsigned_elt) kind

To each element kind is associated an OCaml type, which is the type of OCaml values that can be stored in the Bigarray or read back from it. This type is not necessarily the same as the type of the array elements proper: for instance, a Bigarray whose elements are of kind float32_elt contains 32-bit single precision floats, but reading or writing one of its elements from OCaml uses the OCaml type float, which is 64-bit double precision floats.

The GADT type ('a, 'b) kind captures this association of an OCaml type 'a for values read or written in the Bigarray, and of an element kind 'b which represents the actual contents of the Bigarray. Its constructors list all possible associations of OCaml types with element kinds, and are re-exported below for backward-compatibility reasons.

Using a generalized algebraic datatype (GADT) here allows writing well-typed polymorphic functions whose return type depend on the argument type, such as:

let zero : type a b. (a, b) kind -> a = function
  | Float32 -> 0.0 | Complex32 -> Complex.zero
  | Float64 -> 0.0 | Complex64 -> Complex.zero
  | Int8_signed -> 0 | Int8_unsigned -> 0
  | Int16_signed -> 0 | Int16_unsigned -> 0
  | Int32 -> 0l | Int64 -> 0L
  | Int -> 0 | Nativeint -> 0n
  | Char -> '\000'
val float32 : (float, float32_elt) kind

See Bigarray.char.

val float64 : (float, float64_elt) kind

See Bigarray.char.

val complex32 : (Complex.t, complex32_elt) kind

See Bigarray.char.

val complex64 : (Complex.t, complex64_elt) kind

See Bigarray.char.

val int8_signed : (int, int8_signed_elt) kind

See Bigarray.char.

val int8_unsigned : (int, int8_unsigned_elt) kind

See Bigarray.char.

val int16_signed : (int, int16_signed_elt) kind

See Bigarray.char.

val int16_unsigned : (int, int16_unsigned_elt) kind

See Bigarray.char.

val int : (int, int_elt) kind

See Bigarray.char.

val int32 : (int32, int32_elt) kind

See Bigarray.char.

val int64 : (int64, int64_elt) kind

See Bigarray.char.

val nativeint : (nativeint, nativeint_elt) kind

See Bigarray.char.

val char : (char, int8_unsigned_elt) kind

As shown by the types of the values above, Bigarrays of kind float32_elt and float64_elt are accessed using the OCaml type float. Bigarrays of complex kinds complex32_elt, complex64_elt are accessed with the OCaml type Complex.t. Bigarrays of integer kinds are accessed using the smallest OCaml integer type large enough to represent the array elements: int for 8- and 16-bit integer Bigarrays, as well as OCaml-integer Bigarrays; int32 for 32-bit integer Bigarrays; int64 for 64-bit integer Bigarrays; and nativeint for platform-native integer Bigarrays. Finally, Bigarrays of kind int8_unsigned_elt can also be accessed as arrays of characters instead of arrays of small integers, by using the kind value char instead of int8_unsigned.

val kind_size_in_bytes : ('a, 'b) kind -> int

kind_size_in_bytes k is the number of bytes used to store an element of type k.

  • since 4.03.0

Array layouts

type c_layout =
  1. | C_layout_typ

See Bigarray.fortran_layout.

type fortran_layout =
  1. | Fortran_layout_typ

To facilitate interoperability with existing C and Fortran code, this library supports two different memory layouts for Bigarrays, one compatible with the C conventions, the other compatible with the Fortran conventions.

In the C-style layout, array indices start at 0, and multi-dimensional arrays are laid out in row-major format. That is, for a two-dimensional array, all elements of row 0 are contiguous in memory, followed by all elements of row 1, etc. In other terms, the array elements at (x,y) and (x, y+1) are adjacent in memory.

In the Fortran-style layout, array indices start at 1, and multi-dimensional arrays are laid out in column-major format. That is, for a two-dimensional array, all elements of column 0 are contiguous in memory, followed by all elements of column 1, etc. In other terms, the array elements at (x,y) and (x+1, y) are adjacent in memory.

Each layout style is identified at the type level by the phantom types Bigarray.c_layout and Bigarray.fortran_layout respectively.

Supported layouts

The GADT type 'a layout represents one of the two supported memory layouts: C-style or Fortran-style. Its constructors are re-exported as values below for backward-compatibility reasons.

type 'a layout =
  1. | C_layout : c_layout layout
  2. | Fortran_layout : fortran_layout layout
val c_layout : c_layout layout
val fortran_layout : fortran_layout layout

Generic arrays (of arbitrarily many dimensions)

module Genarray : sig ... end

Zero-dimensional arrays

module Array0 : sig ... end

Zero-dimensional arrays. The Array0 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of zero-dimensional arrays that only contain a single scalar value. Statically knowing the number of dimensions of the array allows faster operations, and more precise static type-checking.

One-dimensional arrays

module Array1 : sig ... end

One-dimensional arrays. The Array1 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of one-dimensional arrays. (The Array2 and Array3 structures below provide operations specialized for two- and three-dimensional arrays.) Statically knowing the number of dimensions of the array allows faster operations, and more precise static type-checking.

Two-dimensional arrays

module Array2 : sig ... end

Two-dimensional arrays. The Array2 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of two-dimensional arrays.

Three-dimensional arrays

module Array3 : sig ... end

Three-dimensional arrays. The Array3 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of three-dimensional arrays.

Coercions between generic Bigarrays and fixed-dimension Bigarrays

val genarray_of_array0 : ('a, 'b, 'c) Array0.t -> ('a, 'b, 'c) Genarray.t

Return the generic Bigarray corresponding to the given zero-dimensional Bigarray.

  • since 4.05.0
val genarray_of_array1 : ('a, 'b, 'c) Array1.t -> ('a, 'b, 'c) Genarray.t

Return the generic Bigarray corresponding to the given one-dimensional Bigarray.

val genarray_of_array2 : ('a, 'b, 'c) Array2.t -> ('a, 'b, 'c) Genarray.t

Return the generic Bigarray corresponding to the given two-dimensional Bigarray.

val genarray_of_array3 : ('a, 'b, 'c) Array3.t -> ('a, 'b, 'c) Genarray.t

Return the generic Bigarray corresponding to the given three-dimensional Bigarray.

val array0_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t

Return the zero-dimensional Bigarray corresponding to the given generic Bigarray.

  • raises Invalid_argument

    if the generic Bigarray does not have exactly zero dimension.

  • since 4.05.0
val array1_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array1.t

Return the one-dimensional Bigarray corresponding to the given generic Bigarray.

  • raises Invalid_argument

    if the generic Bigarray does not have exactly one dimension.

val array2_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array2.t

Return the two-dimensional Bigarray corresponding to the given generic Bigarray.

  • raises Invalid_argument

    if the generic Bigarray does not have exactly two dimensions.

val array3_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array3.t

Return the three-dimensional Bigarray corresponding to the given generic Bigarray.

  • raises Invalid_argument

    if the generic Bigarray does not have exactly three dimensions.

Re-shaping Bigarrays

val reshape : ('a, 'b, 'c) Genarray.t -> int array -> ('a, 'b, 'c) Genarray.t

reshape b [|d1;...;dN|] converts the Bigarray b to a N-dimensional array of dimensions d1...dN. The returned array and the original array b share their data and have the same layout. For instance, assuming that b is a one-dimensional array of dimension 12, reshape b [|3;4|] returns a two-dimensional array b' of dimensions 3 and 4. If b has C layout, the element (x,y) of b' corresponds to the element x * 3 + y of b. If b has Fortran layout, the element (x,y) of b' corresponds to the element x + (y - 1) * 4 of b. The returned Bigarray must have exactly the same number of elements as the original Bigarray b. That is, the product of the dimensions of b must be equal to i1 * ... * iN. Otherwise, Invalid_argument is raised.

val reshape_0 : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t

Specialized version of Bigarray.reshape for reshaping to zero-dimensional arrays.

  • since 4.05.0
val reshape_1 : ('a, 'b, 'c) Genarray.t -> int -> ('a, 'b, 'c) Array1.t

Specialized version of Bigarray.reshape for reshaping to one-dimensional arrays.

val reshape_2 : ('a, 'b, 'c) Genarray.t -> int -> int -> ('a, 'b, 'c) Array2.t

Specialized version of Bigarray.reshape for reshaping to two-dimensional arrays.

val reshape_3 : ('a, 'b, 'c) Genarray.t -> int -> int -> int -> ('a, 'b, 'c) Array3.t

Specialized version of Bigarray.reshape for reshaping to three-dimensional arrays.

Bigarrays and concurrency safety

Care must be taken when concurrently accessing bigarrays from multiple domains: accessing a bigarray will never crash a program, but unsynchronized accesses might yield surprising (non-sequentially-consistent) results.

Atomicity

Every bigarray operation that accesses more than one array element is not atomic. This includes slicing, bliting, and filling bigarrays.

For example, consider the following program:

open Bigarray
let size = 100_000_000
let a = Array1.init Int C_layout size (fun _ -> 1)
let update f a () =
  for i = 0 to size - 1 do a.{i} <- f a.{i} done
let d1 = Domain.spawn (update (fun x -> x + 1) a)
let d2 = Domain.spawn (update (fun x -> 2 * x + 1) a)
let () = Domain.join d1; Domain.join d2

After executing this code, each field of the bigarray a is either 2, 3, 4 or 5. If atomicity is required, then the user must implement their own synchronization (for example, using Mutex.t).

Data races

If two domains only access disjoint parts of the bigarray, then the observed behaviour is the equivalent to some sequential interleaving of the operations from the two domains.

A data race is said to occur when two domains access the same bigarray element without synchronization and at least one of the accesses is a write. In the absence of data races, the observed behaviour is equivalent to some sequential interleaving of the operations from different domains.

Whenever possible, data races should be avoided by using synchronization to mediate the accesses to the bigarray elements.

Indeed, in the presence of data races, programs will not crash but the observed behaviour may not be equivalent to any sequential interleaving of operations from different domains.

Tearing

Bigarrays have a distinct caveat in the presence of data races: concurrent bigarray operations might produce surprising values due to tearing. More precisely, the interleaving of partial writes and reads might create values that would not exist with a sequential execution. For instance, at the end of

let res = Array1.init Complex64 c_layout size (fun _ -> Complex.zero)
let d1 = Domain.spawn (fun () -> Array1.fill res Complex.one)
let d2 = Domain.spawn (fun () -> Array1.fill res Complex.i)
let () = Domain.join d1; Domain.join d2

the res bigarray might contain values that are neither Complex.i nor Complex.one (for instance 1 + i).